RTD or robotaxi: which costs the public less?

Robotaxi prices are just starting to show up, so every assumption here is yours to change. The only fixed inputs are each route's real boardings and estimated cost. The table compares the net public cost of each: bus cost minus bus fares, against robotaxi operator cost minus whatever fare riders pay.

RTD side: what replacing a route would save

Driving and vehicle maintenance always count. For 2024 bus they are 31% and 19% of operating cost (NTD).
Untick to count only costs that end with the route. Administration, garages and most stops stay when one route is cut.
RTD's figure: $53.1M (2026). Security is already inside operating cost; this removes that share.
Vehicle replacement and debt interest are not included yet: they need RTD's audited financial report transcribed.

Robotaxi side

Rush hour & verdict
Observed fares user-contributed
No trips reported yet. Report a robotaxi fare you paid.
Reset to defaults
Saving if robotaxi-better routes switch
$11.8M
a year, net of fares · 1.3M boardings
Robotaxis needed at rush hour
196
for those routes, at once
Net public cost, all 4 routes
$124.5M
robotaxi: $116.4M · RTD cost counted: 100%
RouteBoardingsBus cost / boardingRobotaxi cost / boarding RTD net costRobotaxi net costVerdictDifference Cars at rush hour Break-even $/mi
R RidgeGate Parkway Station to Peoria Station 1,283,393 $21.96 $11.99 $27.2M $15.4M Robotaxi saves $11.8M $2.21 196
D 18th&California Station to Mineral Station 2,405,236 $13.60 $11.99 $30.8M $28.8M Too close saves $2.0M $1.34 367
E Union Station to RidgeGate Parkway Station 2,678,789 $12.94 $11.99 $32.6M $32.1M Too close saves $447.7K $1.27 409
W Union Station to Jefferson County Government Center-Golden Station 3,346,205 $10.94 $11.99 $34.0M $40.1M RTD costs $6.1M $1.06 511

Robotaxi cost = boardings × trip length × (1 + empty miles) ÷ riders per vehicle trip × cost per vehicle-mile. Assumptions in this run: $1.25/vehicle-mile, 40% empty miles, 1.0 riders per trip, NTD average trip length, $0.00 rider fare per mile.

Every route uses the same average trip length, so robotaxi cost per boarding is identical across routes. RTD does not publish trip length by route. Riders on long express and regional routes travel further than average: set a trip length to test them.

RTD net cost = estimated route cost × the share you chose to count (100%), minus fares. Robotaxi cost per mile includes the accessible-fleet premium. Break-even is the base operator cost per mile at which both cost the public the same.

Not modelled: traffic and curb space from extra vehicles, whether an operator would serve low-demand areas, and vehicle replacement and debt for buses (not yet transcribed from RTD's financial report).